Roofing & Roof Replacement
Roofing in
High River, Alberta.
High River rebuilt almost an entire town inside three years after 2013. Those roofs went on together, and they are now reaching the age where they need looking at together.
Roofing in High River
What High River actually needs from a roofing job.
No other town we serve has High River’s roof-age profile. After the June 2013 flood, 5,308 homes were affected and the town spent roughly $400 million rebuilding. An enormous share of High River’s housing was therefore re-roofed or newly roofed between 2013 and 2016, in a compressed window, largely with the shingle grades that were standard and available at the time.
That matters now because those roofs are hitting eleven to thirteen years. It is not the end of their life, but it is the point where an inspection stops being optional: the seal strips have been through a decade of chinook cycling, the vent boots are entering the window where the rubber collars crack, and any installation shortcut taken during a rushed rebuild has had ten years to show itself. If you bought a rebuilt High River home, you may not know which of those applies to yours.
The second thing about this town is hail. High River is the southern anchor of hailstorm alley, the corridor that runs from here north through Calgary into central Alberta. On a roof that is already a decade old, a single significant hail event can take five to ten years off what is left, which is why we look hard at granule loss on every High River roof we inspect.
About High River
In June 2013 the Highwood River put almost all of High River under water. Roughly 13,450 residents and 5,308 homes were evacuated, Hampton Hills was deliberately flooded to drain the rest of the town, and Beachwood and Wallaceville were never rebuilt. The town has since spent around $400 million on reconstruction. High River also anchors the southern end of the corridor Environment Canada calls hailstorm alley, which runs from here north through Calgary into central Alberta.
Where We Work
High River neighbourhoods we cover.
Our Standard
What every High River roofing job includes.
A roof replacement is only as good as the layers you never see again. We strip to the deck, inspect every sheet of sheathing, and rebuild the system properly: ice and water shield at every eave, valley and penetration, high-tear synthetic underlayment across the whole deck, all-new metal flashings, and shingles nailed to the manufacturer pattern. Then the quote comes back itemized line by line, so you can see exactly what each of those layers cost.
Full tear-off, never a layover
Every shingle and every layer of old underlayment comes off. Covering an old roof hides the deck, traps heat, adds weight and voids most manufacturer warranties.
Deck inspected sheet by sheet
With the roof stripped we check for rot, delamination and deflection. Anything that needs replacing is photographed and shown to you at a per-sheet price quoted before we start.
Ice and water shield
At every eave, in every valley and around every penetration. In chinook country this is the layer that stops a freeze-thaw ice dam becoming a ceiling stain.
Synthetic underlayment
High-tear synthetic across the entire deck rather than felt on the corners. Better water resistance and safer footing for the crew.
All-new metal flashings
Step, apron, chimney and vent boots replaced rather than reused. Reused flashing is the most common leak on an otherwise sound new roof.
Class 4 options for hail country
Impact-rated asphalt, and Euroshield rubber where you want the hail damage itself warrantied rather than just lab-rated.
Ventilation checked and corrected
Intake and exhaust assessed against code. A poorly ventilated attic cooks shingles from below and voids the product warranty.
Itemized quote, 20-year warranty
Every line priced in plain language, and a 20-year workmanship warranty in writing on top of the manufacturer product coverage.
High River Pricing
What this costs in High River.
Real 2026 ranges for the Calgary region. Your written quote gives a firm number after we have been on site, because a price without an inspection is a guess.
Small bungalow
$8,000 – $12,000
Simple, walkable roof under about 1,500 sq ft
Average home
$9,000 – $18,000
Architectural asphalt, full tear-off
Class 4 impact-rated
$12,000 – $22,000
Usually $2,000 to $4,000 over standard architectural
Euroshield rubber
$16,000 – $28,000
Hail damage warrantied to 2 inches for 50 years
Ranges include tear-off, materials, labour and disposal. Steep pitch, cut-up rooflines and deck repairs move the number, which is exactly why every line appears separately on your quote. For the full regional breakdown see our Calgary roof replacement cost guide.
What moves the number in High River
High River has an unusual split. A large part of the town was rebuilt or substantially repaired after 2013, so the decks under those roofs are young, sound and quick to work on, and quotes come in clean. The older core is the opposite: original board sheathing rather than plywood, mature trees limiting where a trailer can sit, and fascia that has usually reached the end of its life. We quote sheathing and fascia per unit before we open anything so the two situations do not get priced the same way.
Permits & Local Rules
What applies in High River?
The Town of High River treats a like-for-like re-shingle or re-clad as maintenance, so no development permit is required. A permit applies where the work alters the structure, changes roof shape or height, adds floor area, or follows fire or flood damage. Properties inside the post-2013 flood mitigation areas can carry additional requirements, and we confirm the position for your specific address before starting.
FAQ
High River roofing questions.
A typical High River home runs $9,000 to $18,000 for a full architectural asphalt replacement, with smaller bungalows in the older streets from around $8,000. Class 4 impact-rated shingles add roughly $2,000 to $4,000, which is worth pricing given where this town sits in the hail corridor. Every quote is itemized line by line.
Worth inspecting. Rebuild-era roofs are now eleven to thirteen years old, which is the point where vent boots start cracking, seal strips have been through a decade of chinook cycling, and any shortcut from a rushed rebuild has had time to surface. It does not automatically mean replacement. It means you should know what you have rather than assume.
Not for a straight like-for-like re-shingle, which is treated as maintenance. Properties inside the post-2013 mitigation areas can carry additional requirements for structural or substantial work, and we confirm the position for your specific address with the Town before we start rather than assuming.
Most single-family homes are stripped, decked, underlayed and reshingled in one to two working days. Larger homes, steep pitches and significant deck repair can run to three. Weather is the variable, and we will not shingle onto a wet or frozen deck to save a day.
We inspect the deck as we strip it. Damaged sheathing is photographed, shown to you, and replaced at the per-sheet price already stated on your quote. You never meet a surprise number on your driveway with the roof open.
Yes. Class 4 impact-rated asphalt for most homes, and Euroshield rubber where you want the strongest hail answer available. Euroshield is made in Calgary from recycled tires and warranties hail damage up to two inches across for fifty years, which is different from a lab rating.
More in High River
Your whole exterior, one crew.
Roof Repair in High River
Rebuild-era roofs reaching the age where the small things start failing, plus hail from the south end of the corridor.
Siding in High River
Rebuild-era cladding reaching its first maintenance point, and older High River homes where what sits behind the panel is more interesting than what is on it..
Eavestrough in High River
Seamless aluminum formed at your High River address, sized for the roof feeding it, and with genuine attention to where the water ends up.
Soffit & Fascia in High River
Aluminum soffit and fascia with the attic intake genuinely calculated.
